Lone Star Wiring Loom
Lone Star Wiring Looms:
Every anchoring system has to be wired in to operate. LSM Australia looms are made using tinned marine grade Australian Made oxygen free cable, H/D tinned copper lugs and epoxy filled heatshrink. These premade looms are a simple “plug and play” system saving hours on installation. The staff at Lone Star Marine are wiring loom specialists with many thousands of both generic and custom looms made for customers annually for every type of vessel.
- All LSM wiring looms are rated for winches to 2500W.
- We only use quality HD tinned lugs and dual wall epoxy filled heat shrink.
$324.99 – $379.99
Lone Star Wiring Loom Measurements:
L1. Battery to Switch Panel
Switch Panel mounting area of 100 x 100mm. This should be located to the left or above the steering position.
L2. Battery to Solenoid
The solenoid can be mounted in a dry place anywhere between the Switch Panel and winch motor but must be installed upright. Size is appr. 110x60x110. There will be four cables attached to the top. Under the dash or near the winch motor is ideal.
L3. Switch Panel to Solenoid
L4. Solenoid to Winch Motor
Supplied installation instructions feature Placement Diagram and switch Panel Template for easy installation.
Product Range-Generic Looms for Half Cab and Runabout Style Boats:
1000XS Loom, boats to 5.5m
L1-4.5m, L2-4.5m, L3-1m, L4-2.5m
1000S Loom, boats to 6.5m
L1-5.8m, L2-5.8m , L3-1m, L4-3.2m
1000L Loom, boats to 7.5m
L1-6.5m, L2-6.5m, L3-1m, L4-3.8m
More boating products
Additional information
| Weight | 7.00 kg |
|---|---|
| Dimensions | 45.00 × 20.00 × 45.00 cm |
